BlackArmor NAS 220 Firmware Update free download, BlackArmor NAS 220 Firmware Update download on software download

The most current Firmware Update Code for the Seagate BlackArmor NAS 220 Servers. BlackArmor NAS 220 Firmware Update is the most current Firmware Update Code for the Seagate BlackArmor NAS 220 Servers. BlackArmor NAS 220 Firmware Update image should only be applied if you have changed your Firmware Update settings to Manual.Though updating the BlackArmor NAS 220 Firmware is a simple procedure, it is recommended that you backup any/all critical data before proceding.Open your browser and launch the Seagate BlackArmor Web User Interface (UI). Provide administrative username/password authentication when prompted. The system Status page opens.Click on the Firmware Update link provided in the left column of the Web UI. The Auto Update page opens. Click on the Manual Update link provided in the left column of the Web UI. The Manual Update page opens.Click Browse to locate/select the sg2000-2000.0631.img file. Once the file/file path is populated in the field provided, click the Submit button. The update starts automatically. This may take a few minutes to complete.When finished the BlackArmor NAS 220 restarts. You will be returned to the Login Page where you can authenticate again to access the Web UI.NOTE: During the update process, do not refresh or shutdown your browser. Requirements: · Safari 3.1 or later

BlackArmor NAS 220 Firmware Update Related Software